The best table top epoxy resin should be self-leveling, UV-resistant, and bubble-free. Look for high-gloss epoxy resin specifically formulated for table coating, such as Bond Craftor Table Top Epoxy, which offers scratch resistance and long-term clarity.

To prevent bubbles in epoxy resin, mix slowly to reduce air pockets, use a heat gun or torch to pop bubbles after pouring, and work in a warm environment (75-85°F or 24-30°C) for better flow and leveling.

Most standard table top epoxy resins can withstand up to 120-150°F (49-65°C) before softening. For high-temperature epoxy, choose a heat-resistant formula that can handle up to 200°F (93°C) for better durability.

Standard table top epoxy resin is not fully UV-resistant and may yellow or degrade under sunlight. For outdoor epoxy tables, use a UV-stabilized epoxy or apply a UV-protective topcoat like polyurethane.

Most tabletop epoxy resins take 24-48 hours to cure to the touch and up to 5 days for a full cure. For best results, let the epoxy cure in a dust-free, temperature-controlled environment.

Yes! To apply a second coat of epoxy, lightly sand the first layer (220-320 grit) to ensure adhesion, clean the surface, and pour a new ⅛-inch coat for a seamless finish.

For minor scratches, polish with automotive-grade polishing compound or a clear epoxy topcoat. For deep scratches, lightly sand and apply a thin new layer of epoxy resin for a smooth finish.

Table top epoxy is self-leveling, designed for thin pours (⅛ inch max), and cures faster. Casting epoxy resin allows deep pours (up to 2 inches) and cures slower to reduce heat buildup and bubbles.

While table top epoxy resin is heat-resistant, placing hot cups or plates (above 120°F/49°C) directly on the surface may cause softening or damage. Always use coasters or heat-resistant pads for protection.